Product Finder > Compressor & Assemblies > Compressors > Reciprocating Compressor > Single Stage Compressor

Bitzer semi-hermetic compressor CE4S 4TES-12Y-40P 400V

Order Number:
BRC033
Manufacturer Number:
4TES-12Y
Price:

Product Description

A closely stepped range of compressors for modern refrigeration, air conditioning and heat pump systems.

With its new BITZER ECOLINE series, BITZER offers high-efficiency universal compressors that satisfy the demands of modern refrigeration systems:extended range of applications

• Energy efficientcost-effective power regulation

• Wear-resistant drive mechanism

• Quiet and low-vibration

• Minimal space requirements

• Robust

BITZER ECOLINE compressors for operation with frequency inverters up to 70 Hz

All BITZER ECOLINE compressors are designed and optimised for 70 Hz operation. Depending on the refrigerant used and the environmental conditions, a compressor with a PW standard motor (400 V, 3-50 Hz) can be used, or a special motor (230V/400V, 3-50 Hz*) may be required and connected in a delta circuit (230 V, 3-50 Hz). The latter is the case for compressors using version 1 and 2 motors where they are to be operated throughout the entire documented area.

The use of a PW standard motor for 400 V or the connection of a 230/400 V motor in a star circuit must be discussed with BITZER on an individual basis due to the drop in the torque value when operating above 50 Hz  see also Technical Information KT-420.

Technical Data

Dimension

Length: 303 mm

Width: 685 mm

Height: 385 mm

General Information

CR Levels: 0.5

Number of Cylinders: 4 pcs

Refrigerant: R134a, R450A, R513A, R1234yf, R404A, R507A, R448A/RR455A

Engine Version: 1

Series: CE4

Compression Type: Hubkolben

Electrical Data

Starting Current (Locked Rotor): 81.0 A

Supply voltage: 400/3/50 V/Ph/Hz

Max. Operating Current: 28.2 A

Max. Power Consumption: 16.0 kW

Weight

147.0 kg

Flow Volume

48.5 m3/h

Pipe Connections

Discharge Line: 28.0 mm (1 1/8 inch)

Suction Line: 42.0 mm (1 5/8 inch)

Volume

Oil Charge: BSE32

Option: BSE55 bei R134a, R450A, R513A, R1234yf tc > 70oC

Oil Quantity: 2.6 l

Additional Information

Note 1:  Part winding motor Y/YY- 4VES-6Y .. 6FE-50Y wind distribution 50%/50%- 8GE-50Y .. 8FE-70Y ?/?? wind distribution 60%/40%- Use motor contactors rated to about 60% of the max. operating current for PW start up.- Y/? design on request380-420V PW YY-3Ph-50Hz440-480V PW YY-3Ph-60Hz

Note 2: Data for integration of the frequency converter (FC) � motor version 3 (R134a compressor): based on 400 V/3/50 Hz mains supply and use of 400 V/3/50 standard motor for FC operation up to 70 Hz. FC motor versions 1 and 2: Operation above 50 Hz anywhere within the operating area requires a special voltage motor.

Note 3: Data for 400 V/3/50 Hz with direct mains power supply. Observe the max. operation current / max. power input when selecting contactors, leads and fuses. Contactors: Category AC3. Use overcurrent relay to avoid exceeding max. operating current.

Accessory

Accessory 1: Additional ventilator

Accessory 2: Check valve

Accessory 3: Control valve for power controller

Accessory 4: Control valve for unloaded start system

Accessory 5: Crankcase heater Refrigerator oil Unloaded start system

Accessory 6: Electronic oil level monitor without storage lid Refrigerant collector for RU

Accessory 7: IQ Module add-on Motor protection

Option: Refrigerator oil BSE55 with R134a, tc > 70 �C Pressurised gas temperature sensor RSK unit (Liquid receiver without compressor), Rail set top

Get a Quick Quotation

Thank you for your inquiry!
Our regional team member will contact your shortly.
Oops! Something went wrong while submitting the form.