Search
Certified according to the European Pressure Equipment Directive 2014/68/EU
• Heat exchanger pipes: made from Cu or Cu-Ni (saltwater resistant version) with newly developed pipe geometry and a "low fouling" profile on the cooling medium side
• Heat exchanger pipes
Diameter - 108 mm
• 2 pass-G 3/4 Inch
• 4 pass- G 1/2 Inch
• 2 pass-2 x G 1/2 Inch
• 4 pass-G 1/2 Inch
• Outlet-1-14 UNS Inch
• Inlet-1-14 UNS Inch
14.0 kg
• Dte 10K-14270 watts
• Dte 15K-21400 watts
• Dte 10K-11500 watts
• Dte 15K-17200 watts
Pressure drop: 2 pass-10 kPa
• 2.14 m3/h (Nominal)
• 2.75 m3/hr (Max)
• 0.85 m3/h (Min)
Condenser Capcity: 14.8 kW
• 2 pass - 0.76 l/s (2.74- m3/hr)
• 4 pass 0.38- l/s (1.37 - m3/hr)
• Outlet Diameter: 12 mm (1 3/8" inch)
• Inlet Diameter: 16 mm (5/8"-inches)
• Refrigerant side- 5.1 dm
• Cooling medium side- 0.9 dm
Performance data based on:Refrigerant: R134a2 pass coolingRefrigerant inlet temperature: 90 oC. Cleanliness factor on cooling medium side: 0.00004 m3K/WStandard versionCondensation temperature: 40 oC.
Cooling medium inlet temperature: 29 oC Salt water resistant versionCondensation temperature: 35 oC
Cooling medium inlet temperature: 25 oC
Condenser capacity is heavily influenced by the conditions in which the system is being operated. Performance data for other refrigerant and cooling media can be found in the BITZER SOFTWARE.This performance data assumes a maximum flow speed of 2.0 m/s for the salt water resistant versions.
Fluid temperature of 20 oC and container filled to 90%.
Additional refrigerant outlet.
For welding neck flange DIN2633, PN 10/16 or threaded flange DIN2566, PN 10/16
• Accessory 1: Adapter
• Accessory 2: Rail set bottom
• Accessory 3: Rail set top
• Accessory 4: Upper mounting plate